The peeling and end punching machine of round tube terminal is
completed at one time
This machine is mainly used for round tube terminal punching. The
stripping and punching of the wire is completed at one time, and
the terminal within the range of 4.0 square meters does not need to
change the mold.
Machine parameters| Product name | Tube type automatic peeling terminal crimping machine |
| Processing range | AWG10-30# |
| control mode | Man machine interface, electronic control, pneumatic control |
| Operation mode | Automatic operation + manual operation |
| Suitable for wire | 0.5-4.0 M2 |
| Suitable terminal | The length of terminal insulator is within 7.5mm and the length of
conductor is within 10mm |
| Crimping shape | Quadrilateral crimping (imitation Square) |
| Replace product | There is no need to change the mold for large and small terminals,
and manually adjust the vibrating plate and electric memory |
| throughput | 2.5s/piece (depending on the single operation cycle of the machine) |
| Test items | Whether the terminal is detected and whether the right safety door
is opened |
| working temperature | 10-25 degrees (ambient temperature of the machine) |
| working temperature | 30-80% HR (non condensing) |
| weight | 40KG |
| Power Supply | AC220V50/60Hz |
| Product size | 350*450*400 |
| Gas source | 06-0.8mpa (keep no less than 0.6MPa when connected to dry air
source) |
Machine functions and features:
1. The whole machine is of closed design, safe and reliable
operation.
2. touch screen operation, electrically adjust the peeling depth
and length, and save the set parameters.
3. The terminal is supplied automatically, and the four sides of
the terminal are crimped (imitation Square), without replacing the
crimping die.
4. Agile automatic trigger, fast and convenient.
5. Semi automatic operation and manual setting out.
6. automatic induction peeling, terminal threading, crimping
terminal and automatic feeding.
7. Alarm reminder: when there is no terminal in the guide slot of the
vibrating plate and the right door is not closed correctly, the
machine will send an error alarm (can be closed). The machine will
give an error alarm (can be switched off).
8. When the wire passes through the crimping interface and triggers
the sensing device, the machine will automatically complete
operations such as peeling and crimping terminals. To prevent ions
from entering, and has high sensitivity.
9. The company is a factory specializing in the production of wire rod
processing equipment in Chinese mainland. It has 11 years of
production experience and customer service. It mainly produces end
beating machine, peeling machine, soldering machine, winding
machine, wire cutting machine , etc.
